Arturo EP3020

Water vapour permeable, coloured floor coating, fillable as scratch coat with semi-gloss finish (2-C, EP)


It is suitable as a coloured, durable, seamless floor coating for cement- and anhydrite- bonded subfloors, magnesite, tiling and asphalt.

Arturo EP3020 Floor Coating is especially suitable on floors that are exposed to light and medium loads. For example for:

  • Storage areas
  • Private garages
  • Production areas

For other subfloors seek specific advice.


  • Satin gloss
  • Open to diffusion
  • Can be diluted with up to 5% water
  • Can be filled with quartz sand
  • High abrasion resistance
  • Durable
  • Easy to clean
  • Easy to apply
  • Low odour
  • Solvent-free

Technical data


Approx. 100 – 250 g/m², Ca. 500 – 700 g/ m² as scratch coat depending on substrate surface texture.

Mixing ratio

74.0 part by weight comp. A
26.0 part by weight comp. B

Full mechanical resilience

After 3 days*

Water and chemically resistant

After 7 days*

Water quantity

5%, depending on the flooring system.

Solids content

Approx. 53%

Ordering information

Article Packsize
Arturo EP3020 10 kg Multiple colours Set: A + B = 10 kg: A = 7.40 kg. B = 2.60 kg
Arturo EP3020 25 kg Multiple colours Set: A + B = 25 kg: A = 18.50 kg. B = 6.50 kg

Quality seals and badges


Installation systems for screeds, floors and wood flooring

Machinery and special tools for substrate preparation and installation of floor coverings

Complete product range for installation, renovation and maintenance of wood flooring

Resin and cementitious floor finishes combining performance and design

Installation systems for tiling and natural stone

High quality painting, plastering and drywalling tools