Arturo EP2480 Flooring Systems (Explosion Protection)
Electrically conductive, epoxy self-smoothing flooring system. Suitable for areas that are exposed to explosive substances or substances with a flash point < 55 ̊C.
- Self-smoothing Floor
- Arturo EP2480
- Conductive Primer
- Arturo EP6400
- Copper tape/Conducting Set
- Primer/Scratch Coat
- Arturo EP6200
- Arturo EP6700
- Subfloor/Concrete
Product information
Arturo EP2480
Electrically conducting self-smoothing floor for explosion-protected areas, flash point < 55°C. (2-C, EP)
Arturo EP6400
Electrically conducting primer (2-C, EP)
Arturo EP6200
Ready to-go, filled scratch coat (2-C, EP)
Arturo EP6700
Very low emission, 2-component, epoxy-based primer, damp-proof membrane and resin for use as a scratch coat.
Arturo EP6300
Pre-filled, very low emission, 2-C, Epoxy Scratch Coat
Benefits:
- Electrically conducting
- Resistant to impacts, shocks and abrasion
- Good chemical resistance
- Wide range of colours
The System
Flooring System
Multilayered epoxy based system
Layer Thickness
Approx. 1.5 mm
Load Limit
Heavy loads
Area of Use
• Storage and production areas with flammable substances
• Production areas with explosive substances
• Munitions factories and depots
