Arturo EP7600

Very low emission, transparent, waterborne, 2-component sealer based on epoxy with extra matt finish (2-C, EP)

Data sheet

Applications

Suitable as a very low emission, transparent, durable, wear-resistant finish on Arturo EP Self-smoothing Floors, Arturo Resin Screeds as well as Arturo Sealers and Arturo Coatings. Arturo EP7600 is suitable on floors that are exposed to light and medium loads, for example for:

Arturo EP2500 Self-smoothing Floor
Arturo EP1000/EP1200/EP1250 Resin Screed
Arturo EP3950 Coating
Arturo EP3900/EP3910 Coating
Arturo EP3010 Coating

Properties

Extra matt
Easy to apply and clean
Open to diffusion
Good resistance to chemicals
Durable
Abrasion resistance
Very low emission

Product Datasheet EP7600 Sealer_EN 346 KB
Safety Datasheet Arturo_EP7600_A+B_(GB) 487 KB
ART_NL_INT_Chemical Resistance List_EP-7600_2025-03 95 KB
Slip Resistance 478 KB
Arturo EP7600_EC1 Plus_GB 312 KB
Arturo Productoverview 3 MB
Cleaning Recommendations Instructions for Cleaning and Care 85 KB
Cleaning Recommendations Electrically Conductive Self-smoothing Floor 177 KB
Cleaning Recommendations Electrically Conducting Self-smoothing Floors 179 KB

Consumption	Approx. 120 g/m² per layer 1 layer is sufficient, 2 layers possible
Mixing ratio	60 part by weight comp. A 40 part by weight comp. B
Water and chemically resistant	After 7 days^*
Layer thickness	Approx. 52 μm
Solids content	45%